Bottle Cap Wreath
Have you made your decorations for the 4th of July yet? Our Family Attic shared a tutorial for this Bottle Cap 4th of July Wreath. This rustic wreath could be made for any occasion by changing the color scheme, but I think it’s perfect for a summer holiday. Have fun preparing for all of your 4th of July festivities!
Click here to purchase bottle caps
Tulle Flag Wreath
I found this beautiful Tulle Flag Wreath tutorial from It’s a Muegge Life via Tip Junkie. This wreath is perfect for the upcoming months since Flag Day and July 4th are quickly approaching.
I hope you have a wonderful Memorial Day!
The Bow for the Blue Braided Wreath
I made a triple bow using two different ribbons. I wanted to repeat the color of the wreath, yet add some shimmery effect.
I used 32″ of Woven Shimmer in silver, 7/8″ wide and 32″ of Elenora, Royal/Silver, 3/8″ wide. I treated the ribbons as one, placing the smaller ribbon on top of the wider one. Long streamers are made from the same ribbons.
Here is a video about how to create the bow used to finish off the blue braided wreath in yesterday’s post.
I really like this wreath. The highlights on the satin ribbon add a lot of dimension to the design. It will look great for the holidays yet can be used throughout the winter months. You certainly could add small snowflake embellishments to the wreath. Be creative!
Our new Candy Cane Stripes ribbon would be really pretty in a braid. I would order the 7/8″ wide ribbon for a large wreath, or 3/8″ wide for small wreaths. I think I’ll try that next. If you try a different color or ribbon, please send us a photo to share.
Be sure to send us your creations using the link on the right.
Click here to order supplies
This braided ribbon wreath is one you will enjoy making. Once you learn the technique, you can try it with different size ribbons to make large wreaths for doors and walls or small ones for ornaments. I used this tutorial from The Trouble with Crafting to learn the process. There is also a great YouTube video showing the process for small braided wreath ornaments, Christmas Ribbon Wreath by cibglazer. I found these both helpful but then I upped it a notch to make this larger version of a braided wreath. I love the results, hope you do too!
This type of braid is called a Military Braid. We will make two identical braids and put them together on a metal hoop to create our wreath.
- 10″ metal hoop or a metal hanger formed into a circle.
- Approximately 55″ inches of blue satin ribbon to wrap around the metal hoop
- 4 lengths of 5/8″ blue satin ribbon cut 72″ long
- 32″ of woven simmer silver ribbon, plus a 24″ piece of the same ribbon (Bow)
- 32″ of Elenora, Royal/silver 3/8″ ribbon, plus a 24″ piece of the same ribbon (Bow)
- Hot glue gun and glue sticks
After forming a hoop from a metal hanger, or use a metal purchased hoop, wrap the metal with about 55″ of blue satin. Secure the ends with a dot of glue. Also use a pliers to bend the hanger part to form a loop so the wreath can be hung. If you use a purchased hoop, attach small length of ribbon now to use to hang your finished wreath.
We will make two braids that are identical. Following are the directions for one braid. Begin by taking two of the 72″ long satin ribbons
Step 1: Take two 72″ long satin ribbons. Fold down 1- 1/2″ from one end of each satin ribbon. I used a pin to hold it in place while I inserted a small piece of Stitch Witchery or other similar product under the end of the ribbon. The Stitch Witchery is used to hold the end down. You can see it at the tip of the pin. You want to create a loop at one end. Make sure there is an opening of at least 1″ in the loop. Do the same for the other ribbon.
Step 2: Working from the back, begin the braiding by sticking one loop of one ribbon through the loop of the other ribbon. About one inch should be showing on the other side.
Step 3: Taking the right ribbon in your hand, fold the ribbon away from you to form a loop. Don’t crease the ribbon, allow it to be rounded. Push the loop through the opening of the left ribbon until it is about 1″ beyond the opening. Gently pull on the left ribbon to remove the slack but don’t crimp the ribbon. Keep them flat.
Step 4: Take the left ribbon, fold it away from you and form a loop. Push the new loop through the last loop. Pull the right ribbon to remove the slack.
Step 5: Repeat Step 3 and Step 4 until you used up the ribbons. One may be a little longer than the other. That’s OK. Uniform side loops look more professional and with practice it will become easier. Remember to keep the ribbon braid flat.
Step 6: To end the braid, just push the remaining end of the last ribbon through the loop
Step 7: Repeat Step 1-6 with the two remaining 72″ ribbons to make the second braid.
Step 8: When the two braids are complete, put a pin at the end to hold the ends in place.We will secure this later.
Step 9: Lay the braids right side down on a table and place the covered metal hoop over the braids. Arrange the braids to fit the curve of the hoop. The bottom of the two braids are overlapped slightly at the bottom of the wreath. The top is also overlapped slightly. Pin the braid in place. When you have the braids look even and round, place a dot of hot glue under the loop to hold the braid in place. I then made small rolls with the remaining ribbon ends left at the end of the braid and glued them in place on the front side. Don’t cut them, just roll them and glue. This is where the bow will go, so it will be OK. You can see how I had bent and covered the entire hanger to create a hook on the wreath. Turn the wreath over.
Directions for adding a bow will be featured on Thursday’s blog.
Click here to order ribbon.
Holiday Wreaths seemed to be the perfect theme for this week. Last Thursday, I looked out my patio doors while working at my computer and all I saw was SNOW! I know I wasn’t the only one surprised to see it, but there it was falling on top of my yard full of unraked leaves. It made me in the mood to think, “WREATHS” for the holidays. Today I am featuring a tulle wreath.
Tulle Wreath Supplies
- 10” metal wreath hoop
- 2 spools of tulle,
burgundy tulle, cut into equal 18” lengths
- Embellishments, purchased fall flower collection with leaves, burlap ribbon made from a cut piece of burlap
Cut the tulle into 18” lengths. You can make them longer, if you wish. 24” will make a larger wreath but you will need another spool of tulle. HINT: scrunch the tulle at the place you want to cut it to make it easier to cut.
Put the two ends together to make a loop, put the loop under the metal hoop, fold the ends of the tulle over the metal hoop and pull the ends through the loop. Pull tightly to make a knot.
Repeat all the way around the hoop until you have your desired thickness. Attach a ribbon to the metal hoop to create a loop to hang the wreath.
Embellishment can be anything you wish to add. The sky is the limit! I wired a purchased fall flower with leaves and a floppy burlap bow to use it at Thanksgiving. Hint: Since the color is burgundy, adding Christmas embellishments later will carry it throughout the season.
Can’t wait to see your tulle wreaths for the holidays. Please send in your ideas and creations. There is a link on the right side of this blog.
See you tomorrow!
Click here to order tulle.